en 
Easy Max Hammer Effect – 951 Grey
DESCRIPTION
Easy Max Hammer Effect – 951 Grey is a decorative spray paint designed to create an impressive hammered finish. Suitable for both indoor and outdoor use, it can be applied to a variety of surfaces, including metal, wood, glass, stone and plastic. It provides a uniform, glossy finish with excellent coverage and resistance to scratches and impacts. For optimal adhesion, especially on plastic or very smooth surfaces, the use of a suitable Cosmos Lac primer before painting is recommended.
APPLICATION
The surface to be painted must be clean, dry and free from dust and rust. For optimal adhesion, especially on plastic or very smooth surfaces, the use of a suitable COSMOS LAC primer before painting is recommended. Shake the can vigorously for approximately 2 minutes to ensure that the pigments are thoroughly mixed. Before first use, spray into the air for 3–4 seconds to clear any sediment from the tube inside the can. Test the product on a small, inconspicuous area before application. Spray evenly in thin coats from a distance of 25–30 cm. For best results, apply 2 coats, allowing approximately 15 minutes between coats. Optimal application temperature: 10°C–25°C.
FEATURES
- Volatile Organic Compounds (VOC): 650 g/L
- Drying time (Temperature: 20°C, Humidity: <65%): Touch dry: 1 hour, Maximum hardness: 72 hours
- Coverage: 5 m²/L
- 400ml
CAP SYSTEM
RED DOT CAP
- High Coverage
- Thin & Regular
- Gradual Spraying
- No drips
COLOR RANGE
INSTRUCTIONS FOR USE
Decorative spray paint for creating a hammered effect on various surfaces such as metal, wood, glass, stone, plastic, etc. Shake well for approximately 2 minutes. Apply outdoors or in a well-ventilated area. The surface must be clean, dry, and free from dust and rust. To achieve optimal adhesion, especially on plastic or very smooth surfaces, apply an appropriate COSMOS LAC primer before use. Before use, perform a test spray on paper or cardboard. Spray evenly in thin coats from a distance of 25–30 cm. Wait 15 minutes before applying the next coat. After full drying, additional coats can only be applied after 72 hours to avoid affecting the previous layers. 1–2 coats are recommended. After use, turn the can upside down and spray for approximately 3 seconds.
