en 
Master Mechanic Filler 02 – Grey
DESCRIPTION
The Master Mechanic Filler 02 – Grey is an acrylic undercoat protection designed for filling minor scratches before painting. Ideal for use on any type of surface, it offers excellent coverage and filling properties and provides corrosion prevention.
Can be sanded and over-painted with any color for a smooth, finished look.
APPLICATION
A top-quality surfacer, perfect for all surfaces except plastic.
FEATURES
- Gloss
- Ideal quick-drying primer for pre-treating metal surfaces
- Provides anti-rust protection
- Good isolation through spots
- Improves the adhesion of the top coat
- Excellent filling properties
- Enhances the gloss level of the topcoat
- Protects against oxidation
- High temperature resistant
- Very thick and fast drying
- Elastic and durable in the long run
- Easy to use and easy to sand
- Uniform, smooth finish
- Viscosity: 18-25 sec
- Density: 0.6-0.8 g/L
- Drying time: Touch (20°C, Humidity <65%): 5-10 min, Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
- Coverage: 3 m²/L
- 500ml
CAP SYSTEM
SMART CAP
- Less overspray
- Extreme coverage
- Fast drying
- Hard chisel lines
- Even coating
- Suitably for effects
- Dual way spraying
COLOR RANGE
INSTRUCTIONS FOR USE
Acrylic filling putty. Easily sanded with water sandpaper. With a rotating nozzle for horizontal or vertical spraying. The surface must be clean, dry, and lightly sanded. Shake the can for 2 minutes. Spray first into the air and on a test surface. Spray from a distance of 10-15 cm. Apply two even layers. After use, hold the can upside down and spray for 5 seconds. Allow the surface to dry for 2 hours before applying the final paint. Application temperature: 10-25°C. Shelf life: on the bottom of the can.
